Linea Ceiling Tile
Choose between MDF, Plywood or Particle board
Standard size is nominal 24″ x 24″ to work with standard T-bar systems.
Standard Class A
Lay-In tiles use sit atop existing t-bar much like a standard gypsum ceiling tile.
Linea Lock Clip tiles hang below existing t-bar using a specialized clip providing a floating look. The Linea Lock system provides a typical 3/8” reveal, partially concealing the t-bar it is suspended from.
Tegular Edge with Clip
Tegular Edge with Clip tiles hang inset of existing t-bar using a specialized clip. The Tegular Edge with Clip system provides a reveal the same width as the standard t-bar; typically 15/16“.
Linea Ceiling Tiles are acoustically reflective.
Class A Fire Rated when tested to
ASTM E–84 or CAN/ULC S102 (FS ≤ 25; SD ≤50)
Linea Ceiling Tiles comply with seismic code compliance through attachment by direct screw through the wood backer to the heavy–duty grid.
Local code requirements should be consulted in order to determine additional requirements
Linea Ceiling Tiles should be on site for a minimum of 48 hours prior to installation into a building. Panels require 72 hours acclimatization prior to installation. Relative humidity between 25% and 55% and a temperature between 50°F (10°C) and 86°F (30°C) both prior and after installation.