LINEA Continuous Plank

LINEA Continuous Plank is a low cost, progressively installed, open–reveal linear wood slat system designed for interior and exterior wall and ceiling installations where a seamless, random joint, linear appearance is preferred. LINEA Continuous Plank is offered as random lengths for solid wood designs and 8’ lengths for wood veneer composite designs. LINEA Continuous Plank utilizes concealed clip hardware to maintain consistent reveal gaps and to ensure even surface alignment between panels from end–to–end and is generally faster to install than the wood–backed versions. LINEA ContinuousPlank is available in multiple standard module sizes, can be customized or mixed and matched together for a totally unique look. LINEA Continuous Plank is available in a wide variety of solid wood or real wood veneer options and in standard, custom or simulated finishes. When combined with acoustical insulation, LINEA Continuous Plank can achieve medium to high acoustic performance.

SPECIFICATION–example

Type:  LINEA Continuous Plank
Wood Species: Download Chart
Core: Solid Wood of Fire Rated ULEF (MDF / Particle Board)
Edge: Square,Grooved or with matching edge banding (Veneer only)
Finishes:  Natural Clear, Custom Stained or Tinted Clear Finishes in matte, Satin or Semi–Gloss Sheen
Reveal:
Open or Standard Black Fabric, Class A Fire Rated.
Fire Rating : Class A per ASTM E–84 (USA) and CAN/ULC S102 (Canada)

PHYSICAL DATA

ACOUSTICS: LINEA Continuous Plank panels without additional acoustic insulation, will act as a sound diffusor and should be considered acoustically transparent. When paired with acoustical insulation or duct liner behind, the panels can achieve medium to high sound absorption
FIRE RATING: Solid Wood FX Lumberguard or FX Lumberguard XT chemical fire retardants are factory applied to all LINEA Continuous Plank wood slats prior to further finishing to achieve a Class A Fire Rating when tested to ASTM E-84 (USA) and CAN/ULC S102 (Canada). When site cutting is required, FX Lumberguard can be re-applied to the cut locations and re-sealed to bring the panel back into conformance. Other topically applied chemical fire retardants or intumescent finishes may be used in lieu of FX Lumberguard to achieve Class A Fire Rating. In some cases, the specifying consultant may need to file an Alternate Solution with local authorities for approval.
LINEA suggests consulting with local building code consultants during the specifying stage to avoid any potential issues related to Fire Rating.
Veneer /Composite: LINEA ContinuousPlank panels with real wood or engineered wood veneers are laminated to Class A Fire Rated Composite MDF or Particle Board cores. The combination of Wood Veneer and Finish is less than 1mm thick (0.5mm in most cases) and therefore should not be considered significant to the overall rating.
SEISMIC: LINEA Grille panels are engineered for applications in all seismic areas when installed per LINEA installation instructions.
SITE CONDITIONS: Wood products are hygroscopic in nature and must be stored, installed & maintained in a controlled building environment. Temperature range should be maintained between 60° – 90° F (15° – 32°C). Relative Humidity range should be kept within a minimum 25% – max. 55% (not to exceed 20% RH from peaks to valleys). Failure to maintain site conditions will void the LINEA warranty.

Start typing and press Enter to search