Linea Kerf Ceiling Tiles

Linea Acoustic Kerf Ceiling Tile is a panelized linear wood ceiling system designed to showcase the veneer face while providing superior acoustical performance. Spaced V–Grooves are engineered to dissolve sound internally. 2 x 2’ panels work best with standard T–bar systems. This design is best suited for high occupancy areas.

Information & Options

Core:

Choose between MDF, Plywood or Particle board

Panel Size:

Standard size is nominal 24″ x 24″ to work with standard T-bar systems.

Fire Rating:

Standard Class A

Installation Methods

LAY IN

Lay-In tiles use sit atop existing t-bar much like a standard gypsum ceiling tile.

LOCK CLIP

Linea Lock Clip tiles hang below existing t-bar using a specialized clip providing a floating look. The Linea Lock system provides a typical 3/8” reveal, partially concealing the t-bar it is suspended from.

TEGULAR EDGE WITH CLIP

Tegular Edge with Clip tiles hang inset of existing t-bar using a specialized clip. The Tegular Edge with Clip system provides a reveal the same width as the standard t-bar; typically 15/16“.

Performance Info

Acoustics:

Linea Acoustic Kerf Ceiling Tiles are manufactured with an Acoustic Non–Woven Backer, a sound absorbing fabric, allowing sound to pass through to the plenum space behind

Fire Rating:

Class A Fire Rated when tested to
ASTM E–84 or CAN/ULC S102 (FS ≤ 25; SD ≤50)

Seismic:

Linea Acoustic Kerf Ceiling Tiles comply with seismic code compliance through direct screw attachment to the heavy duty grid. Local code requirements should be consulted in order to determine additional requirements

Acclimatization:

Linea Acoustic Kerf Ceiling Tiles  should be on site for a minimum of 48 hours prior to installation into a building. Panels require 72 hours acclimatization prior to installation. Relative humidity between 25% and 55% and a temperature between 50°F (10°C) and 86°F (30°C) both prior and after installation.

Recent Posts

Start typing and press Enter to search