Linea Squared is a cell–like panel that sits directly on a 9/16” (14mm) heavy–duty grid. Squared is an easy to install ceiling that allows for air circulation and the integration of sound and light devices above the ceiling. This functional ceiling creates a contemporary floating structure once installed.
Standard size is nominal 24″ x 24″ to work with standard T-bar systems.
Standard Class A
Lay-In tiles use sit atop existing t-bar much like a standard gypsum ceiling tile.
Linea Lock Clip tiles hang below existing t-bar using a specialized clip providing a floating look. The Linea Lock system provides a typical 3/8” reveal, partially concealing the t-bar it is suspended from.
TEGULAR EDGE WITH CLIP
Tegular Edge with Clip tiles hang inset of existing t-bar using a specialized clip. The Tegular Edge with Clip system provides a reveal the same width as the standard t-bar; typically 15/16“.
Linea Squared Panels can be manufactured with optional fabric backer allowing sound to pass through to the plenum space behind. Squared Grilles are acoustically transparent.
Class A Fire Rated when tested to
ASTM E84 or CAN/ULC S102 (FS ≤ 25; SD ≤50)
Linea Squared Panels comply with seismic code compliance through attachment by direct screw through the wood backer to the heavy–duty grid. Local code requirements should be consulted in order to determine additional requirements
Linea Squared Panels should be on site for a minimum of 48 hours prior to installation into a building. Panels require 72 hours acclimatization prior to installation. Relative humidity between 25% and 55% and a temperature between 50°F (10°C) and 86°F (30°C) both prior and after installation.