LINEA Veneer Flat Panels

LINEA Veneer Flat Panels are high–end, interior panels commonly used as ceiling tiles, wall cladding or column wraps when the look of real wood is preferred. Numerous suspension types, styles, panel sizes and finishes can be combined to achieve nearly any design objective. All panels are offered as Non–Perforated for acoustic reflectivity or can be machined in a variety of ways for sound absorption when required. Additional sound absorbing media can be installed behind the panels to further enhance acoustical performance.

GENERAL–features

     Many standard or custom perforation types and
         patterns available for acoustic attenuation.
—     Numerous installation techniques, reveal,
         wood trim and ceiling access options.
—     Wide variety of real wood veneers or engineered wood veneers.
     Standard or custom panel sizes (Max 4’W x 10’L).
     Custom colors, stains or opaque painted finishes (Low VOC).
     Factory attached SoundTex acoustical
         fabric improves sound absorption.
—     Class A Fire Rated per ASTM E-84 (USA) and
         CAN/ULC S102 (Canada) is standard.
     Sustainable options available including FSC, LEED, WELL, and HPD.
—     MDF or Particleboard composite core with No Added
        Urea Formaldehyde (NAUF) and high recycled content.
—    Simple Mechanical, Electrical and Plumbing (MEP) Integration.
    Designed for use in all seismic areas.

PHYSICAL DATA

ACOUSTICS: LINEA Veneer Flat Panels come standard with SoundTex acoustic backing for enhanced sound absorption (excluding Non-Perforated). When paired with acoustical insulation or duct liner behind, LINEA Veneer Flat Panels can achieve high NRC Ratings up to 0.95. Generally, the higher the open area percentage the greater the sound attenuation.
FIRE RATING: LINEA Veneer Flat Panels with real wood or engineered wood veneers are laminated to Class A Fire Rated, recycled, NAUF MDF or Particleboard composite cores. The combination of Wood Veneer and Finish is less than 1mm thick (0.5mm in most cases) and therefore should not be considered significant to the overall rating (per AWI/AWMAC).
SEISMIC: LINEA Veneer Flat Panels are engineered for applications in all seismic areas when installed per LINEA installation instructions and local code.
SITE CONDITIONS: Wood products are hygroscopic in nature and must be stored, installed & maintained in a controlled building environment. Temperature range should be maintained between 60° – 90° F (15° – 32°C). Relative Humidity range should be kept within a minimum 25% – max. 55% (not to exceed 20% RH from peaks to valleys).Failure to maintain site conditions will void the LINEA warranty.

Start typing and press Enter to search